poseidonos-cli system set-property

Set the property of PoseidonOS.

Synopsis

Set the property of PoseidonOS.

Syntax: poseidonos-cli system set-property [–rebuild-impact (highest | higher | high | medium | low | lower | lowest)]

Example (To set the impact of rebuilding process on the I/O performance to low): poseidonos-cli system set-property –rebuild-impact low.

poseidonos-cli system set-property [flags]

Options

  -h, --help                    help for set-property
      --rebuild-impact string   The impact of rebuilding process on the I/O performance.
                                With high rebuilding-impact, the rebuilding process may
                                interfere with I/O operations more. Therefore, I/O operations may
                                slow down although rebuilding process becomes accelerated. 
                                

Options inherited from parent commands

      --debug         Print response for debug.
      --fs string     Field separator for the output. (default "|")
      --ip string     Set IPv4 address to PoseidonOS for this command. (default "127.0.0.1")
      --json-req      Print request in JSON form.
      --json-res      Print response in JSON form.
      --port string   Set the port number to PoseidonOS for this command. (default "18716")
      --unit          Display unit (B, KB, MB, ...) when displaying capacity.

SEE ALSO

• poseidonos-cli system - System commands for PoseidonOS.